Certificated water games grade Suppliers for kids

You know,in some water area like sea and salty lake, the floating water park parts like D rings, carabiners and trampoline springs get rusted shortly. The parts may get useless due to heavy rust.Well, what we do to avoid this problem is to use 316 stainless steel D rings and springs.In fact, our clients who operate inflatable water park in Japan, Croatia had this issue a few years ago that the D rings got rusted and broken after one season use. After change it to 316 stainless steel, the D rings were in good condition after 3 years using.If you have further queries about rusty inflatable water park parts, welcome to contact us via below form.

Bouncia water trampoline is one of the most popular single item in a commercial grade inflatable water park. When you assemble it, you need to follow some guidelines, or it’s difficult to set up. Today I would like to share a 5-step guidance as the following. 1) Fasten the steel pipes on the water trampoline tube with webbing strap( 8 steel pipes in total) :2) Tighten the screws with the wrench at the 8 joints of steel pipes ( 8 screws in total ) 3) Fix 2 springs at each angle of the water trampoline, 16 springs in total for 8 angles. This step is very important. If you do not fix the four angles 1st, it’s difficult to fix other springs.4) Then fix the rest springs:5) Fasten the protection pad on the trampoline net and steel pipes with ropes. And this is the last step of assembly a water trampoline.If you have some queries about how to set up the water trampoline or other aspects about inflatable water park. Welcome to comment down to discuss with us.

During the operation of the inflatable water park, some holes or cracks may appear. For small holes or cracks, hot air heat gun repairing is a good choice. Hot air heat gun repair method is a kind of welding and will not peel off. Today I would like to share the hot air heat gun repairing processes for inflatable water park items. To avoid damage the products, test on a waste material first before repairing on the product.1）Find the holes or cracks on the water park item.2）Clean the area around the holes or cracks and wait until it’s dry.3）Choose the proper wide heat air gun nozzle. Cut the repair material according to the sizes of holes or cracks.4）Switch the temperature to 6 or 7 range. Preheat it about 2 minutes, then test it with material, if hot air can melt the surface of the material, then go to the next step.5）Fill in a piece of material into the product to block the hole or cracks, see below picture.6）There are 2 standards to confirm if the temperature is proper:A: No damage on materialB: The inside grids can be seen while tearing the strip Above are the basic processes of repairing the inflatable water park item with hot air heat gun. If you do not have a heat gun yet or you need a video of the repair process, please leave the message below.  

You may notice different inflatable floating water park equipment suppliers have different warranty period. Some suppliers offer 1-3 years warranty, some even offer 5 years.Well, how should the water park buyer choose? To be on the safe side, check the suppliers’ warranty policy details carefully no matter the period is 1 year or 5 years. For the suppliers who offer 5 years’ warranty. It’s possible they consider 5 years warranty as 5 years life span and do not have details. This could lead to after-sale disputes.Some inflatable water park buyers may think the longer the warranty period, the higher quality level. To some extent, this thought is reasonable. Another factor that may influence the inflatable water park manufacturers to determine their warranty period is how much after-sale cost they add to their sale prices.Generally, warranty policy is a very important factor to consider when you are buying the inflatable water park equipment. Longer warranty period does not equal to higher quality, it’s necessary to compare the warranty details and other aspects.We are happy to hear from you for any question about inflatable water park.