2019 -
09 -
15 11:22:49 plastic parts and glass fiber, usable soap water, disinfection, washing powder, bleaching powder, such as dilution after soaking, brush with a soft cloth or soft scrub, reoccupy clear water is rinsed clean, dry or dry with a clean cloth, finally 84 disinfectant spray disinfection.
Software can use soft cloth with soap water scrubbing sponge part, or place in sunlight disinfection.
Resistance to the wooden part of wet, heat-resisting, do not fade, usable soap bubble after washing to dry, spray on 84 disinfectant disinfection.
Metal parts if asked to rust, usable brush to floating rust, wipe with dry cloth;
After the sunlight available colorless sanhe brand paint flowing about 20 cm distance sweep and spray again, after being dry spray again, protection, paint all dry again after cleaning, drying and sterilization.
Naughty fort circuit electrical parts cleaning, the first to make sure that power outages, water is forbidden, generally scrub with wet cloth, wait for dry after appearing to turn on the juice.
All amusement equipment, outdoor slide, drill tube parts should not be water after rain, if any, should be in the lowest place play a diameter of 4 mm hole drainage.
If it is indoor activity room, the floors, walls, etc. , daily ultraviolet light disinfection, indoor to ventilation, spraying disinfection with hydrogen peroxide solution once a week.
disinfection at the same time, be sure to check the connection part is solid, the metal frequently active connection part of the gas, electrical circuit and the common parts if there is any damage.